Exit I Stove Jack
€69.00
This item is in stock
The Exit I Stove Jack is a flashing to safely vent a wood burning tent stove from a canvas or poly-cotton tent. The Exit 1 fits flue pipes up to 160 mm (6'') in diameter and can be easily cut to fit snugly around most flue pipes. Works with side exit and top exit tent stoves.
The correct placement of the stove depends on its size, size of tent, flue vent style, desired temperature, and the environment in which you intend to set up your tent. Pre-installed universal size stove jacks do not provide customers with the flexibility to position their tent stove in a location of their choosing.
To ensure proper placement and optimal efficiency, CanvasCamp offers a wide range of modular stove jacks that are compatible with any cotton tent and most wood burning tent stoves. Made of stainless steel and galvanized rubber. All components required for quick and easy installation are included. CanvasCamp recommends keeping the stoves fire box at least 76cm (30") from the stove jack. Larger stoves, hot burning wood, or high-heat output smaller stoves may require additional distance. When you are not using your tent stove, you can place the rain cover instead of the silicone.
Make sure to leave about 1m (or 3 feet) of flue pipe in between the stove and the flashing installed in the canvas of your tent.
| Total weight (kg / lbs) | 0.7 / 1.5 |
|---|---|
| Compatible With | Frontier Plus, Orland Tent Stove, Orland Camp Stove |
| Flue Compatibility | 75 - 160mm (3" - 6-1/4") |
Manual
- 2 clamping plates
- High-temp rubber boot
- Mounting nuts & bolts
- Diameter metal ring exterior: 24cm (9-1/2")
- Diameter metal ring interior: 19.5cm (7-3/4")
Write Your Own Review
