Exit I Mini Stove Jack

$76.00
This item is in stock

When using a tent stove in your tent, a modular tent stove jack is the best way to exit your flue pipe either through the top of the tent, or through a side wall if your stove allows for it. The Exit I Mini Stove Jack is the smallest flashing we offer and accepts stove pipes up to 5.5cm (2") in diameter. The stove jack is made out of stainless steel and galvanized rubber to securely hold hot flue pipe sections a safe distance away from the canvas. Be sure to keep the stove at least 76cm (30") from the stove jack. To make your pipe fit perfectly you can cut the rubber jack to the right diameter. All the hardware required for installation is included for quick and easy assembly. If you are using a bigger tent stove with a wider flue pipe, check out our larger stove jacks: Exit I or II.

One of the primary benefits of canvas is it's ability to breathe, thereby releasing the moisture that is always accumulating inside a tent. This becomes particularly pronounced in cooler weather when water begins to condense inside a tent. A wood stove is the perfect solution for this situation, driving moisture out while keeping its occupants warm and toasty while giving them the ability to cook food,warm water and dry their gear out.

A little-known fact about wood stoves is that most of the heat comes not from the firebox but the 1st few feet of the exhaust pipe. The greater length of pipe inside the tent, the more warmth you will get from the stove. However, putting a hole in the roof of a tent can sometimes cause a leak at the stove jack when pitched poorly, so another option is to have the stove exhaust exit through the side of the tent. In this situation where the exhaust pipe is necessarily very short, a larger firebox is called for.
We don't do pre-cut flue holes as that would limit you to where you can put your stove and the type of flue kit used
Our Exit's enable you to fit any kind of stove and flue kit, anywhere you want in your tent.

Note: All CanvasCamp tents accept all models of stove jacks.

Make sure to leave about 1m (or 3 feet) of flue pipe in between the stove and the flashing installed in the canvas of your tent.

More Information
Total weight (lbs)0.9
Compatible WithFrontier, Gstove Heat View
Weight (lbs)2
Flue Compatibility2" - 4-3/4"

set up tent stove heat shield canvas

  • 2 clamping plates
  • High-temp rubber boot
  • Mounting nuts & bolts
  • Diameter exterior ring: 140cm (5.5")
  • Diameter interior ring: 115cm (4.5")
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account