Exit II Stove Jack

This item is in stock

Big tent stoves have big flue pipes, which require big stove jacks. The Exit II Stove Jack is specifically designed to vent the flue pipe of for large, high heat, wood burning tent stoves. A stainless steal heat shield surrounds your flue pipe and is held securely in place with a galvanized rubber flashing. Compatible with any canvas tent and includes all the hardware needed for a quick and easy installation. Be sure to keep the stove at least 76cm (30") from the stove jack. It's a chimney for your bell tent!

With this heat shield you get a Ø 100mm/4'' tube surrounded by a Ø 127mm/5'' tube for insulation and a heat proof flashing. The orange rubber can be cut to the desired diameter.

One of the primary benefits of canvas is it's ability to breathe, thereby releasing the moisture that is always accumulating inside a tent. This becomes particularly pronounced in cooler weather when water begins to condense inside a tent. A wood stove is the perfect solution for this situation, driving moisture out while keeping its occupants warm and toasty while giving them the ability to cook food,warm water and dry their gear out.

A little-known fact about wood stoves is that most of the heat comes not from the firebox but the 1st few feet of the exhaust pipe. The greater length of pipe inside the tent, the more warmth you will get from the stove. However, putting a hole in the roof of a tent can sometimes cause a leak at the stove jack during the rainy season, so another option is to have the stove exhaust exit through the side of the tent. In this situation where the exhaust pipe is necessarily very short, a larger firebox is called for.
Note: All Canvascamp tents accept all models of stove jacks.

Make sure to leave about 1m (or 3 feet) of flue pipe in between the stove and the flashing installed in the canvas of your tent.
More Information
Total weight (lbs)2.2
Compatible WithAll stoves sold by CanvasCamp
Weight (lbs)2
Flue Compatibility4"

exit II assembly instruction tent stove

  • 2 clamping plates
  • High-temp rubber boot
  • Mounting nuts & bolts
  • Diameter metal ring exterior: 24cm (9-1/2")
  • Diameter metal ring interior: 19.5cm (7-3/4") 
  • Insulator pipe
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account